Subscribe Now to Get AUD $15 Off Coupon
Up to 68GPM of suction power for improved cleaning capabilities.
Significant reduction in charging time to 2.5 hours.
Power meets efficiency with the Aiper Plus’s 7800mAh battery that provides up to 110 minutes of cleaning capabilties.
The filter tray is easy to clean; simply remove the cover, and rinse the filter with a hose.
Special water release port design clears the water from your device in seconds when you lift the machine up.
With one click, you can submerge the Seagull Plus in your pool for it to automatically start cleaning.
Insert the brush into the slots at the bottom and the Seagull Plus is ready to clean.
The beautifully designed indicator communi- cates the unit’s status so you’re always on top of your cleaning game.
| ID | Seagull SE | Seagull Plus | Seagull Pro |
|---|---|---|---|
| Products |
|
|
|
| Feature Type | Cordless | Cordless | Cordless |
| Purchase Price | $299.99 | $399.99 | $899.99 |
| Charging Time | 2.5 hours | 2.5 hours | 1.5 hours |
| Total Weight | 7.6lbs (3.45kg) | 13.8 lbs (6.24kg) | 20.9 lbs (9.5kg) |
| Cleaning Scene | Flat Floor | Flat Floor | Flat Floor/ wall/ water line |
| Cleaning Area | 80㎡ | 120㎡ | 300㎡ |
| Battery Life | 90 Minutes | 120 Minutes | 180 Minutes |
| Motor Power | 30W | 50W | 70W (peak 200W) |
| Battery pack specifications | 4000mAh | 3000mAh | 9000mAh |
| Suction | 11GPM(42LPM) | 44GPM(167LPM) | 130GPM(492LPM) |
| Suction port width | 9cm | 14cm | 18cm |
| Quick drain | × | ✔ | ✔ |
Please ensure your device is switched off. Units will not charge when powered-on. Check that the charger is properly connecteed, and that electricity is flowing to the charger. If no problems are detected, please contact Aiper Customer Care.
The charging port plug should always be firmly installed while the device is operating to prevent the charging port from corroding. If you notice the plug has fallen out of the charging port, immediately remove the device from the pool and dry the charging port. Do not place the device directly back into the pool.
Each device is tested at our facility before leaving the factory . Some residual moisture may be left behind but does not affect the working condition of the unit.
The device does not support cleaning pool walls.
Please check whether the rotor is blocked by debris . If so , please remove ,clean , and reinstall the rotor . If not blocked , please check for damages , as this part may need to be replaced.
Aiper 2023. All Rights Reserved
